Morgan Carbtune - click here to goto home page

                 

Home

Carbtune
Operation
FAQs
Reviews
Testimonials
Your bike

Accessories
Tool Pouch
Carbtool
Colortune
Other products

Prices
OrderShopping Cart

Contact
Our history
Privacy Policy

   
   
Deutsche  Français

100 degree screwdriver

bevel

100 degree screwdriver. 220mm long (8.5inches) approx. (Handle 115mm)


bevel

Selection of bits stored in a rubber moulding.


collar

Collar is removeable for really awkward spaces andcan also rotate to 12 different angles around the shaft.


shaft

Handle can be removed to connect a power tool tothe standard hex drive or to extend the shaft.


power tool

You can connect up a power tool to drive the head.(Power tool not supplied.)



stubby

Or you can use it as a stubby screwdriver with thesupplied standard hex bit holder.


extension

Or use more standard bit holders that you have toextend the length of the shaft  to almost any size.


hex

100 degree angled drive.


bevel drive


Collar can be rotated to 12 positions around shaft.


angle drive



The 100 degree screwdriver (approx) makesadjustment and removal of awkward screws easier!

Bevel 100 is a very useful tool at asensible price.  Can help with those difficult to reach idlemixture screws and at afractionof the price of OE tools.

Features Include:
100 degree angled head allows access intotight, restricted spaces. Paddle collar can be rotated around the shaftto the most convenient position. 
Collar can be removed altogether for very tight spaces. 
Head can be used with a cordless drill or screwdriver as shown inphotos. (Cordless screwdriver not included.)
Includes 12 bits in PzDrive, Philips, Flat and Star.
PH1, PH2, Pozi 1, Pozi 2, Pozi 3. 4mm Flat, 7mm Flat, Torx T10, T15,T20 as well as a standard straight hex bit holder.
Can be used with any of the 1/4" hex drive bits that come with acordless screwdriver.
Handlegrip pulls off and reveals a standard hex drive that can fit apower tool.
Also shaft can be extended in length by using the hex bit holder. Infact you can add as many of these extensions (they come with cordlessscrewdrivers etc.) as you want to make the shaft almost any length.
Can also be used as a straight screwdriver with just the handle and bitholder.

Only approx 43mm clearance needed with 4mm flatbit. (29mm from back of head to front of drive. Bit protudes 14mm fromdrive. For really tight spaces the hex drive of the bit could be groundor cut to reduce the exposed length.
Rotating collar fits any position on the shaft and can be rotated to 12different angles around the shaft for easy steadying of the screwdriver.

You can order directly on this page


£16 for thisvery usefultool.

 

 

Morgan Carbtune Ltd
Unit 33W
Townsend Enterprise Park

Townsend Street

Belfast BT13 2ES

United Kingdom

email: morgan@carbtune.com

Tel 028 9023 9007
Fax 028 9024 7294

International Tel +44 2890 239007
International Fax +44 2890 247294

From USA/CanadaDirect dial
Tel 011 44  2890 239007
Fax 011 44  2890 247294